| Model Type | AUTO CNC-16-8 | |
|---|---|---|
| Max Tube OD. | Wire Carbon Steel | ∅10 mm |
| Wire Stainless Steel | ∅8 mm | |
| Low Carbon Steel | D12.7 x 3.0T | |
| Max Feed Length | 1200 mm，Length can be customized according to customer requirements. | |
| Max Bend Angle | ±180° | |
| Max Rotation Angle | ±360° | |
| Max Bend Radius | R60 mm | |
| Max Number of Bends | 200 | |
| Servo Number | 8-Axis | |
| Servo Motor Spec. Precision Speed | Sleeve Bend Angle | 1.0kW / ±0.05° / 700 RPM (700 RPM/minute) |
| Feeding | 1kW / ±0.05 mm / 550 mm/sec | |
| Rotation | 0.75kW / ±0.05° / 600°/sec | |
| Mandrel Bend | 0.75kW / ±0.05° / 350 RPM (350 RPM/minute) | |
| Shift | 0.4kW / ±0.05 mm / 500 mm/sec | |
| Collet Rotation | 0.75kW / ±0.05° / 600°/minute | |
| Bend Mold Up&Down | 0.4kW / ±0.05 mm (Lifting speed 350 mm/sec) | |
| Mandrel Bend Up&Down | 0.4kW / ±0.05 mm (Lifting speed 350 mm/sec) | |
| Collet System | Pneumatic Cylinder Drive | |
| CNC Controller | PC-based Controller | |
| Program Input | Input using touchscreen &hand –held control unit | |
| Memory Storage Capacity |
Can store a least 999.999 files using USB, or other commonly used devices. |
|
| Axis Control | Industry Servo Control Card | |
| Drive | Servo | |
| Electrical Capacity | Three-phase 380V 15KVA | |
| Size: L × W × H | 2400 x 1100 x 1500 mm | |
| Net Weight | 1700 kgs | |
| Air Compression Waste | 60 L/min, 0.6 MPa | |
| 6-axis servo motion powered by an AC servo motor | ||